REALITY CHECK....ALL signals will be sent to the TV at 30 frames a second or 30 Hz....
The 120 Hz Refresh rate occurs INSIDE the TV....it takes ONE FRAME of picture and sends it to the display 4 times !!
Why? Because......
Have you ever seen a fast moving picture on some of the older TVs? The background gets blurred because so much information is being changed that the TV does a "rough-in" of the entire picture first, then fills in the details on its second-pass.....
NOW....THE TV has the chance to not only "rough-in" the picture on the 1st pass, it has 3 more chances to fill in the details too.....
Before it has to rebuild another frame of Video......
THAT MEANS your TV will completely fill in the details and provide a sharp clear FULLY Detailed Frame of picture on each and every frame.....
While the older ones might only get one chance to provide all the details in the first Pass.....
With fast moving pictures there is too much change to accomplish a fully detailed picture in the first pass.....it takes a couple passes....
That's why the new 120 Hz Refresh rates are going to really sharpen up high speed action......
SONY INTRODUCED "Motion Flow" to the consumer line this year, in the higher end models....XBR4 units have them, and some of the other models too....
LOOK at the manual...The INTRO should tell you about this new refresh rate..or check the specification page.
Well, I did it for you....you have the WAX 2F chassis and the "Motion Flow" technology is in the WAX 3 chassis......
But...you have 1080P which is the highest resolution panel on the market right now....