- The refresh rate will not matter much if you turn on gamer mode, which may make the video quality look bad but at least you get less input lag.
- Most ps3 or xbox 360 video games are 720p and you would want a 720p tv for these. If you had a 1080p, the tv upscaling the resolution would actually make the picture look worse and give worse input lag.
- Most HD-TV shows are either 720p or 1080i, few are 720i or 1080p and you would want a 720p tv for this.
- Most Blu-ray movies are 1080p and you would want a 1080p tv for this.
- Most DVD movies are 480p (NTSC countries) and most older video games are around this resolution. I would recommend you keep your SD-TV for these. = SD-TV looks really bad on a HD-TV especially the larger the HD-TV gets the more noticeable the artifacts are.
- I would rather recommend a Plasma tv over a low end LED or worse a low end LCD tv because plasma's refresh rates are best.
- The soap opera effect is caused by interpolation refresh rates that are put on cheap LED/LCD tv's. Interpolation trys to reduce motion blur and reduces judder.
- How do LED or LCD tv refresh rates work with the FPS of a video? (I recommend real/true 240hz refresh rate, some tv advertising may fool you by listing the fake interpolation or fake backlight scanning/dimming refresh rates).
- http://en.wikipedia.org/wiki/Motion_interpolation (Names of the new technologies for newer tv's at the link): Motion Interpolation or Motion Compensated Frame Interpolation (MCFI), is a form of video processing in which new fake frames are generated between existing ones to up the FPS of a video to reduce motion blur and/or for judder removal/judder adjustment. MCFI video processing may cause gamer input lag and/or artifacts such as the soap opera effect (may ruin the look of a video).
- Many tv's allow viewers to turn motion interpolation (MCFI) off. The tv repeats the frames a certain number of times to match the tv's refresh rate. Example; To display 24 frames per second on a tv with a 120 hz refresh rate, each frame is repeated 5 times every 24th of a second.
- But what happens if the FPS of a video does not match the refresh rate of the tv? Then you get a pulldown, a pulldown is what causes a jittery screen (aka judder) because the tv repeats the odd frames a different amount of times the tv repeats the even frames. Example; A 3:2 pulldown is post popular because it is needed to match a 24 fps video with a 60hz refresh rate tv, odd frames are repeated 3 times (12x3=36) and even frames are repated 2 times (12x2=24) and 36+24=60 FPS for a 60hz refresh rate tv.
How does Plasma tv refresh rates work with the FPS of a video?
- It will take each pixel in a frame and and repeat it a number of times based on the number of sub-field drives (SFD) the tv has with it's refresh rate. Example 1; (NTSC countries) 600hz sub-field drive/motion tv means 60hz FPS x 10 sub-fields per frame = 600hz refresh rate. Example 2; (PAL/SECAM countries) 600hz sub-field drive/motion tv means 50hz FPS x 12 sub-fields per frame = 600hz refresh rate.
- What is focused-field drive (FFD) on Neo-Plasmas? (Light switching speed = better colors and less motion blur) 2500hz focused field drive means sub-fields are virtually packed into 1/2500th of a second as a sharp impluse, creating crisp motion images even in very very fast movining images (FFD is defined as a inverse of light emission period t. 1/t = 1/0.4ms = 2,500 FFD). Regular sub-feild drives like 50 FPS x 12 sub-fields = 600 hz, light emission spreads as wide as 1 field time (1/60th sec) maximum which results in blurry images for very very fast moving images.
- Refresh rates on Plasmas work similar to LED/LCD tv's. These settings are usually automatic, but you can change them in the advanced picture settings, Example 1; 2D 24p FPS mode and choose refresh rates of 48hz/96hz or 30hz/60hz with pulldown (might use interpolation frames for pulldowns), Example 2; 3D mode and choose refresh rates of 96hz for 24 FPS or 100hz for 50 FPS or 120hz for 60 or 24 fps.ect Of course it has gamer mode or many other adjustments.