How do you programme a one for all universal remote?

Question

it is a URC 7711 prime line 1 black universal t.v. remote, and i need to program it with a sharp t.v. i have the codes to try out but i don't know what to do with the codes. Any ideas?

Answer 1

Simply- A TV set uses a code received from a remote control to operate the sets functions. A TVs real remote has the codes built into them. A Universal remote works on many different brands so YOU must tell the remote what TV brand it will be operating. You do this by putting in the code.



Look on the instruction book. It will tell you the sequence of buttons to press to get the remote ready to accept the code. Then enter the code and see it it operates the TV set. Some TV Manufactures use different codes for different models thus the manufacturer may have more than one code listed.

Answer 2

Look in the paperwork that came with your remote. There should be a section for all makes and models of the diferent equipment that the remote will work with. If it's not clear to you, or hard to understand, call the store where you got it from or go online to the website listed on the packaging - there should be a customer service ph # and someone there to help you. Helpful hint - once you get the codes for your equipment, write them down. You may need to re-program the remote again if you change the batteries and you'll want those codes close at hand. I know, it happened to me ; \ Good luck.

Answer 3

The remote should have come with instructions. You need to follow them.

Answer 4

Surely it tells you on the instruction sheet.

Answer 5

I agree with the above-use the instructions.

If you don't have them you can download them from here:

http://www.oneforall-int.com/?pag=53