how do i find my HDMI input setting on my Mitsub T.V. menu?

Question

I have a rear projection mitsubishi H.D. tv with hdmi hook up on the back. The t.v. is about three years old but not a DLP. On my functions menu it shows an icon of an antanna, a dvd, cable, and game. None of these work when i hooked an HDMI cable to it from my PS3.

Answer 1

3 years old with HDMI? Are you sure it's not a USB port?



If it's HDMI, then your remote should have a "device" button on it to switch to the appropriate input. Remotes and TVs do evolve over time though, so it's possible it's labeled something different on your remote. Also, some TVs have a "skip" function which you might have programmed to skip over the HDMI input when you first got the TV since you were not using it. Dig around in the TV menus to see if yours has something like that.



If you've lost the user manual then check the manufacturer's web site as they may have it available for download.



Hope that helps,



-CB

Answer 2

The problem is not the TV but the PS3. you have to hook up the PS3 with a composite cable (RCA) and change the settings for the video and audio output to HDMI. DO NOT set it to 1080p use 702p unless you are sure the TV has 1080p. After you change the output on the PS3 hook it up through the HDMI and toggle through your TV inputs until you see it. Also the inputs are called cable, game etc. by default on your TV but you should be able to rename them.

Answer 3

read the manual