does anyone know a code to make my sky remote work with my beco TV please?

Question

I have a beco TV and want my sky remote to work with it like i have seen other peoples. My son in law gave me some codes and they would not work. This is a pain so if anyone can help thanks in advance

Answer 1

Hi, these are all the codes I could find for Beko



0125 065 398 514 742 743



If your remote is quite new try the 3 figure codes with a 0 in front.



0065 0398 0514 0742 0743

Answer 2

Turn on your sky and press TV on your remote control. Hold down SELECT and the RED key together until the red light on your remote control blinks twice (after about 2 seconds). Press TV again. Enter the code 0297. The remote blinks twice. Press standby on your remote control. If your TV switches off, press TV, then press standby. Repeat the sequence of pressing TV and then standby until the TV switches off, then press select. If the light blinks three times, your remote control has checked all possible settings for the code used. If all else fails then check with Sky Technical help.

Answer 3

Try code 0125. I have just purchased a new remote control and the leaflet it came with has this for the Beko set up code.

Hope this helps.

Answer 4

yep this happened to a mate of mine , you will have to call sky with your tv details , normally found on the label on the back of the tv , they will then tell you over the phone the code you need !!! good luck metay !!!

Answer 5

Try the below link

Answer 6

try 0742 it worked for me